聚氨酯6000面漆_关西油漆_关西涂料

聚氨酯6000面漆_关西油漆_关西涂料

中远关西牌-聚氨酯 6000面漆 PRODUCT DESCRIPTION 产品简介 A high gloss durable finish based on polyurethane for steel surfaces of heavy-duty. 用于重防腐金属表面的高光泽**聚氨酯面漆。 RECOMMENDED USE 用途 As a finish can be used in new construction situations and as industrial maintenance finish for bridges and port machinery etc. 用于新建设施或作为维修保养面漆使用，用于桥梁、港口机械等重防腐设施。 COMPLIED STANDARDS 符合标准 Complies with JT/T 722-2008, JT/T 695-2007,TB/T 1527-2004, JT/T 733-2008 符合公路桥梁钢结构防腐涂装技术条件JT/T 722-2008，混凝土桥梁结构表面涂层防腐技术 条件JT/T 695-2007，铁路钢桥保护涂装TB/T 1527-2004，港口机械钢结构表面防腐涂层技 术条件JT/T 733-2008 FEATURES 产品特性 Outstanding weathering resistance and gloss retention 良好的耐候性和保光性 Good adhesion to epoxy primers 同环氧涂料附着力良好 Outstanding resistance to impact and abrasion 良好的耐冲击和**损性能 PHYSICAL PROPERTIES 基本数据 Color 颜色 Gloss 光泽 Volume Solids 体积固体份 VOC 挥发性有机化合物含量 Flash Point 闪点 Film thickness 涂装膜厚 Theoretical Coverage 理论涂布率 White and Colors 白色及各色 High Gloss 高光 52% 430g/L，accord with EU Dircrtive2004/42/EC，subcategory j 430g/L，符合欧盟溶剂排放指令2004/42/EC，j 子类别 Greater than 23℃ 23℃以上 Dry 30-50microns/coat Wet : 58-96microns/coat 干膜:30-50 微米/道湿膜: 58-96 微米/道 0.091kg/m2/40 microns 0.091 千克/平方米/40 微米 Practical coverage depending on surface conditions, environment, applications, etc. 实际涂布率与表面处理, 外界环境, 施工方法等多种因素有关。 APPLICATION 施工 Application Temperature 施工温度 Mixing 混合 Mixing Ratio 混合比例 Pot Life 混合使用期 -5℃-40℃ Combine Base with Hardener, mix thoroughly with power agitator 混合主剂与固化剂，使用动力工具搅拌均匀 Base/Hardener=8/1(by weight) 主剂/固化剂=8/1（质量比） 5℃ 10℃ 20℃ 30℃ 8hrs 6hrs 5hrs 3hrs Protective Coatings www. Issued Date 2011/6/27 发行日期2011/6/27 Application Methods 施工方法 Thinner 稀释剂 Drying time & Overcoating interval 干燥时间&涂装间隔 Typical undercoat 适用下涂 Typical topcoat 适用上涂 Airless spray, air spray, brush and roller 无气喷涂、空气喷涂、刷涂、滚涂 Airless spray 无气喷涂 Nozzle tip 喷嘴尺寸0.33mm-0.43mm Nozzle pressure 出口压力≥10Mpa Thinning ratio 稀释比率10-20% by weight（重量比） Brush/Roller 刷涂、滚涂 Thinning ratio 稀释比率0-10% by weight（重量比） Retan Thinner 聚氨酯稀释剂 Temperature 温度-5℃ 0℃ 10℃ 20℃ 30℃ Surface dry 指触干燥4hrs 2hrs 1.5hrs 1hr 1hr Touch dry 半硬干燥24hrs 16hrs 12hrs 10hrs 6hrs Min. interval 较小涂装间隔30hrs 24hrs 20hrs 16hrs 12hrs Max. interval 较大涂装间隔- - - - - Universal EP-50,Universal MIO-50 or according to the coating systems of Cosco Kansai Universal EP-50,Universal MIO-50 或参考我司**配套 STORAGE 贮存 Shelf life 贮存期限 Store in dry, cool condition and away from sources of heat and ignition. Containers must be kept tightly closed. 贮存于干燥阴凉的环境中，远离热源及火源。包装桶必须保持封闭。 12 months from date of production (25℃) 自生产之日起12 个月（25℃） DISCLAIMER 提请注意 The information given on this sheet is to the best of our knowledge and accurate at the time of issuing. Since conditions of use are beyond the manufacturer’s control, information contained herein is without warranty, implied or otherwise, and the suitability of the material for the use contemplated is the sole responsibility of the buyer. The information contained on this data sheet is subject to modification at any time due to our policy of modification and product development.Please check this date sheet is current prior to using the product. 本说明书所提供信息均为目前我方所掌握较全面正确的资料,鉴于产品使用条件非我方所 能控制，此中信息不含担保，即仅在选取产品上对买方负责。由于我公司产品及生产工艺 的不断发展，本说明书的内容也会随时进行更改，此中所有信息均以我方确认为主。产品